Comments on: homemade battery tab spot welder hsurfah04

By: DeadeyeDick1

DeadeyeDick1 — Mon, 10 Sep 2012 03:58:18 +0000

No good,? too much heat…

By: thecactustree

thecactustree — Mon, 10 Sep 2012 03:08:43 +0000

u need to make sure your meter was set? to AC because we were running into that problem too…

By: MrAwsome514

MrAwsome514 — Mon, 10 Sep 2012 03:07:47 +0000

some how I dont think it is entirely safe to spot weld things onto alkaline batterys. But this is still cool and I may want to try to make one of my own.?

By: 774drego

774drego — Mon, 10 Sep 2012 02:49:07 +0000

you might want to use a portable band saw on? your next project insted of pliears….

By: YummyMercury

YummyMercury — Mon, 10 Sep 2012 02:20:36 +0000

no it is not as easy as it looks, i did this before, i took a LONG time? to get the secondary out

ps. how many turns on the new secondary

By: faffaflunkie

faffaflunkie — Mon, 10 Sep 2012 02:01:07 +0000

Ted? Kaczynski would be proud.

By: keiontaybrown

keiontaybrown — Mon, 10 Sep 2012 01:24:56 +0000

Can you make video Of How u put The Wires Together??

By: a380rockerfan

a380rockerfan — Mon, 10 Sep 2012 01:16:20 +0000

that looks like a very satisfying action; pulling the wire? out of the secondary!

By: ICUC007

ICUC007 — Mon, 10 Sep 2012 00:18:16 +0000

I guess you must be shy or something huh? Wish you’d have talked us thru it, what you did? and why, and all that good stuff , at least for dummies like me who don’t have much of a clue. I do need to do a tiny bit of spot welding, and my welder broke.
I wasn’t much good at it anyway.

By: a380rockerfan

a380rockerfan — Sun, 09 Sep 2012 23:58:39 +0000

hi! i have cut and rewound my MOT? with thick 2 gauge speaker wire and i was wondering if keeping the shunt in (small iron bar) would affect it’s current output?
Because mine is still in and i want highest current output…