Comments on: HP DV9000 blank screen fix! Video problem BGA rework

By: Nikhil mg

Nikhil mg — Sun, 14 Oct 2012 15:45:46 +0000

hey man mine is a dv3000 can i? do the same?? please help

By: cev2387

cev2387 — Sun, 14 Oct 2012 14:48:17 +0000

Hey Pete, I have an oddball? issue with my dv6700. Ive had this issue that you fixed in the video before. But now I have something new. If I press the power button, the light and screen light up like normal. But as soon as the hard drive spins up to boot, it instantly turns of like someone threw a switch. However, if I hold control alt delelte before it start to boot up, it powers on just fine.

By: cev2387

cev2387 — Sun, 14 Oct 2012 14:42:38 +0000

I have also discovered that the CD rom drive will not read a disk along with one of the USB ports not recognizing anything? I plug into it.I ran a virus scan and found a trojan virus in the E: drive which if im correct is the recovery partition. I have not found a way to remove the virus other then purchaing the recovery disks from HP and flashing it but then again I run into the issue of the CD rom not working correctly. Any feed back will be muchly apprectiated. Thanks. Keep up the good work.

By: gurvur

gurvur — Sun, 14 Oct 2012 14:42:12 +0000

I need to do this so can you give me the list of things i need for this??? I live in Canada so i presume the number of things i need? can be bought from Canadian tire… if you know stores that carry the stuff I need please tell me.

By: mixcatcom

mixcatcom — Sun, 14 Oct 2012 14:31:27 +0000

Well we ship to Canada if you need copper and thermal paste. We also have fixed a couple hundred laptops from Canada over the years if you need help with it. Just? call our shop for details, 321-332-0710 Or hit our site MixcatComputers . com
All the best,
-Pete

By: mixcatcom

mixcatcom — Sun, 14 Oct 2012 13:56:09 +0000

I dont thing the CD / DVD drive not picking up is related to the virus. I think its a chipset issues that needs to be fixed,? I would also swap it with a CD you know works and see if that helps. If you need help with fixing that we can do it at the shop for you. Otherwise follow the directions in this video and It should snap back..
Good luck my friend,
Shop number 321-332-0710 or our website is MixcatComputers . com
All the best,
-Pete

By: mixcatcom

mixcatcom — Sun, 14 Oct 2012 13:36:14 +0000

wow thats odd, Re-seat everything, memory, HD, CD and battery and see if that helps.. The otherthing you might consider is to update to the latest bios.
Hope that helps.
-Pete
321-332-?

By: mixcatcom

mixcatcom — Sun, 14 Oct 2012 13:23:25 +0000

We fix those at the shop if you need help fixing it.. Just call the shop for details ? 321-332-0710 or our website MixcatComputers . com
All the best,
-Pete

By: mixcatcom

mixcatcom — Sun, 14 Oct 2012 13:20:33 +0000

Its a guess at that point, and dangerous. When the solder starts to shine its ready but if you go over you will toast the chip.. I would get the gauge. or we can fix it for you.
All the best,
-Pete
321-332-0710 ?

By: mixcatcom

mixcatcom — Sun, 14 Oct 2012 12:44:14 +0000

Great work!!! Thats? great to hear.
All the best,
-Pete